| Ordering Information |
Public standards
• IEEE 802.3; 100BaseTX
Maximum frame size
• 1,518 bytes and 1,522 bytes with IEEE 802.1Q
|
| Serial port |
| |
• One RS-232, 9-pin "D" connector, configured per IBM AT serial port (DTE)
|
| Data rate switch ports |
| |
• 10 or 100 Mbps half and full duplex
|
| Data rate uplink ports |
| |
• 100 or 1,000 Mbps
|
| Port connectors |
| |
• RJ45 and SC
|
| Redundant power connector |
| |
• One shielded power connector for redundant power source
|
| Power source |
| |
• 90 - 265 VAC, 47 - 63 Hz, 65W; -48VDC - 150W
|
| Heat Generation |
| |
• 222 BTU / hour
|
| Ambient operating temperature |
| |
• 0 – 104 °F (0 - 40 °C )
|
| Cable type |
| |
• UTP (100 ohms)
• Cat 5 required when running at 100 Mbps)
• STP(100 ohms)
|
| MAC addresses |
| |
• 1024
|
| DRAM memory |
| |
• 16 Mbytes
|
| Flash memory |
| |
• 8 Mbytes
|
| Dimensions |
| |
• 1.71" H x 12.187" D x 17.12" W
(4.34 cm H x 31 cm D x 43.5 cm W)
|
| Weight |
| |
• 8 lbs. (3.6 kg)
|
| 10/100BaseT port counts |
| |
• 24
|
| VLAN types |
| |
• Physical port, MAC address, layer 3 address, protocol type, multicast address, custom bit mask
|
